DESCRIPTION

CTW series centrifugal pump is a heavy duty petro-chemical pump whose design conforms to API 610 (Eighth version) as well as GB5656 and ISO13709 standards.  It is a horizontal pump of single stage, single suction with radially split volute casing available with close, semi-open or open impeller. Of the four available grades, Grade I is available with feet support and Grade II, Grade III & Grade IV are with center line supports. According to application requirements, the pump can be equipped with either gland packing seals or mechanical seals such as single face seal or randem seal, double face seal or cartridge seal with or without auxiliary cooling, flushing or sealing protection plans. The pump is highly reliable in performance, easy to maintain and is widely used in petrochemical industries.

SPECIFICATIONS

Pump Inlet Diameter (DN): DN25 – 400mm

Pump Flow (Q) up to 2600 M3/hr

Pump Head (H): up to 300 meters

Working Pressure (P): Grade I (2.5Mpa), Grade II (5Mpa), Grade III (7.5Mpa), Grade IV (13.5Mpa)

Working Temperature (DC): from -80 DC up to 450DC

Motor speed (RPM): 2950r/min (with 2 pole motor) or 1450r/min (with 4 pole motor)

APPLICATIONS

Oil refineries, petro chemical plants, coal chemical plants, low temperature processes, power plants, metallurgical plants, pharmaceutical plants, food stuff plants, paper mills, pulp plants and ocean engineering processes.

Adapt to feeding sulphuric acid, nitric acid, hydrochloric acid, organic or non organic acids of low and high temperatures, alkali solutions of sodium hydroxide, sodium carbonate etc. of low and high temperatures, various petro chemical liquids, organic chemical compounds or other corrosive liquids.